Tenders With No Bids: What Happens After Cancellation and How to Find Low-Competition Opportunities

Martyna Łachut
Martyna Łachut is a public procurement expert who understands, navigates, and bridges both sides of the tendering process. Drawing on years of experience as both a contracting authority and a contractor, she advises, trains, and guides businesses smoothly through the bidding process. A strong advocate for modern solutions that demystify traditional procurement work.

Last updated: November 2026
When a public tender closes without a single bid, the contracting authority has to cancel it. The need behind it stays: the school still needs its roof repaired and the hospital still needs its supplies. Very often the same contract comes back in a new procedure, and a company that spots it early enters a market where nobody competed the first time.
Low competition is common across Europe. According to the European Commission's Single Market Scoreboard, a typical EU country awarded 28% of above-threshold contracts to a single bidder in 2024, with 20% in Germany and 36% in Austria. In Poland, our analysis of 420,000 procurement procedures (in Polish) found that 40.3% of contract lots are decided with one bid and that 54.6% of cancellations happen because nobody submitted a bid. This guide covers the next step: what authorities can do after a cancellation, where repeat tenders appear and how to judge whether one is worth your time.
What a tender with no bids means
A tender with no bids is a public procurement procedure in which no bid arrived before the submission deadline. With nothing to evaluate, the contracting authority cancels the procedure. In Poland this follows Article 255(1) of the Public Procurement Law (Pzp), and other EU countries have equivalent rules. When a tender is split into lots, the cancellation can cover only the lots without bids, while the remaining lots are awarded as usual.
A single-bid tender works differently. With one bid, the authority usually awards the contract to that bidder, provided the bid is compliant and within budget. With no bids, the procedure ends and the authority has to find another way to buy the same thing.
Three cancellation scenarios worth telling apart
No bids is the most common reason a contract returns to the market, and there are two more. Each one says something different about your chances next time.
| Situation | Legal basis in Poland | What it tells a bidder |
|---|---|---|
| No bids were submitted | Art. 255(1) Pzp | Nobody responded to the notice. The next procedure may have very little competition. |
| All bids were rejected | Art. 255(2) Pzp | Bidders were interested, but their bids did not meet the requirements. Check which conditions proved difficult. |
| The lowest bid exceeds the authority's budget | Art. 255(3) Pzp | Competition exists and the money is short. The next procedure may have a higher budget or a narrower scope. |
What the contracting authority can do next
Cancellation closes the procedure and the purchasing need remains. EU procurement rules give the authority several options.
- A new procedure with a contract notice. The authority publishes the tender again, with the same or adjusted conditions: a different budget, a longer delivery period, a new split into lots or lighter selection criteria.
- Negotiated procedure without prior publication. Under Article 32(2)(a) of Directive 2014/24/EU, an authority may use this procedure when an open or restricted procedure attracted no bids or no suitable bids, provided the initial conditions of the contract are not substantially altered. Germany applies this rule in § 14(4)(1) VgV, and Poland in Article 209(1)(1) Pzp above EU thresholds and Article 301(1)(2) Pzp below them. In this procedure the authority negotiates with companies it selects and invites them to bid.
- Postponing or reshaping the purchase. The authority can delay the purchase, merge it with another contract or split it differently. The same need then reappears under a new title or at a later date.
The second path matters most for bidders. If the authority chooses a negotiated procedure without prior publication, the next round does not appear in tender search engines at all. The invitation goes to companies the authority knows and considers capable of delivering.
Who hears about the next procedure
In Poland, after a cancellation the authority must promptly notify the companies that took part in the previous procedure when it launches a new one for the same subject matter (Article 262 Pzp). In a tender with no bids, that list is empty, so nobody receives an automatic notice. Only companies that watch the market themselves find out about the repeat procedure.
There is a second side to this. In Polish below-threshold procedures, the authority may also directly inform contractors it knows in the relevant field once the notice is published (Article 276(2) Pzp, explained in this training material from the Polish Public Procurement Office, in Polish). Companies that are familiar to the authority are therefore more likely to hear about a procedure first-hand.
How common low competition is: official data from Poland
According to the 2024 annual report of the Polish Public Procurement Office (UZP), procedures below EU thresholds received an average of 2.89 bids, the best result since 2015. The share of single-bid procedures still varies widely by contract type.
| Contract type (below EU thresholds, Poland, 2024) | Share of contracts with one bid |
|---|---|
| Works | 14% |
| Services | almost 38% |
| Supplies | just under 43% |
Above EU thresholds, more than one bid was submitted in almost 51% of Polish procedures in 2024, so nearly half received a single bid. These figures come from a government reply to a parliamentary question (in Polish) based on UZP and European Commission data. Extended 2025 tables are available in UZP's analytical data for the annual report.
Works contracts attract the most competition, so a construction tender with no bids is a clear signal that something in the conditions discouraged contractors. In supplies and services, a single bid or no bid at all is much more frequent, which simply means there are more repeat procedures to catch.
Where to find tenders with no bids and repeat procedures
- The cancellation notice on the procedure page. Authorities publish it on the procedure's website, usually a procurement platform, together with the legal basis. In Poland, a reference to Article 255(1) means that nobody submitted a bid.
- Result notices on TED and national portals. For above-threshold procedures, the result notice on TED shows that no winner was chosen. In Poland, the result notice in the Public Procurement Bulletin (BZP) states whether the procedure was cancelled. For an overview of the main portals, see our guide on where to find public tenders in Europe.
- Procurement plans. Polish contracting authorities publish annual procurement plans and update them during the year (Article 23 Pzp). If a cancelled contract reappears in an updated plan, the next notice is close.
- Recurring purchases. Cleaning, waste collection, medicine supplies and maintenance come back regularly. When such a procedure is cancelled, the authority usually returns to the market quickly because the service has to continue.
- Searching by title and content. A repeat procedure usually keeps the same or a very similar title, so the quickest check is to search for the title of the earlier procedure together with the authority's name. Also check the scope of work and subject matter, because the authority may change the split into lots or the CPV codes when it republishes. We explain this in more detail in our article on context-aware tender search.
What else to check about a specific authority, from its purchasing history to the number of bids in past tenders, is covered in our guide on how to research a contracting authority before you bid.
How to assess a repeat tender
A tender with no bids usually has a specific cause: a short delivery period, a budget below real costs, an unusual scope, demanding experience requirements or simply few companies in the region with free capacity at that moment. Comparing the documents of both procedures quickly shows whether the authority changed anything.
| What to compare | Where to find it | What to look for |
|---|---|---|
| Budget for the contract | In Poland, published before bids are opened (Art. 222(4) Pzp) | Whether the budget increased and covers your costs |
| Selection criteria | Tender documents | Whether experience, capacity or certification requirements were eased |
| Delivery period | Tender documents and draft contract | Whether a deadline that may have discouraged bidders was extended |
| Lots | Contract notice and tender documents | Whether you can bid for a part of the scope |
| Award criteria | Tender documents | Whether non-price criteria reward areas where you are strong |
| Draft contract terms | Annex to the tender documents | Penalties, price indexation and payment terms |
If the conditions are unchanged and the authority chose a negotiated procedure without prior publication, what matters most is whether it knows your company. If the conditions changed, the assessment returns to a standard go/no-go decision: do you meet the selection criteria, can you fit the budget and do you have capacity within the delivery period. A careful review of the full tender documentation helps with that assessment.
How to stay on the authority's radar before the next notice
- Clarification questions. In a repeat procedure, you can ask the authority to clarify conditions that make bidding difficult. The answer goes to all bidders, and a change to the tender documents may open the procedure to more companies.
- Preliminary market consultations. Before launching a procedure, the authority may consult the market to prepare the contract (Article 40 of Directive 2014/24/EU, Article 84 Pzp in Poland). Taking part lets you show what can realistically be delivered within a given budget and timeframe.
- A track record with the authority. A company that has bid for or delivered similar contracts for an institution is familiar to it. This matters both when authorities inform known contractors directly and in negotiated procedures without prior publication.
How Minerva helps you catch these procedures
Minerva monitors 16,500 sources every day and matches procedures to your company profile based on the content of the tender documents, beyond titles and CPV codes. A repeat procedure lands on the same list as the original one, also when the authority has changed the split into lots or the CPV codes.
The AI reads the full documentation, including scanned PDFs, and answers questions about selection criteria, budget or contractual penalties with a citation from the source document. Comparing the original and the repeat procedure comes down to a few questions. The contracting authority profile shows its procurement history and previous contractors. The decision to bid stays with you.
If you are looking at the Polish market, the free Playground report shows real procedures from the last 30 days that match your company profile, including how many of them received only one bid. The report covers Polish procurement data only.
Frequently asked questions
What happens when a public tender receives no bids?
The contracting authority cancels the procedure and publishes a cancellation notice on the procedure page. It can then launch a new procedure, move to a negotiated procedure without prior publication, or postpone or reshape the purchase.
Is a tender with no bids always repeated?
Not always. If the need is ongoing, for example cleaning or medicine supplies, the authority usually returns to the market quickly. For one-off purchases it may postpone the contract or change its scope.
Can the authority award the contract without a new contract notice?
Yes, through a negotiated procedure without prior publication, provided the initial conditions of the contract are not substantially altered. In the EU this is based on Article 32(2)(a) of Directive 2014/24/EU, in Germany on § 14(4)(1) VgV and in Poland on Articles 209(1)(1) and 301(1)(2) Pzp.
How do I find out about a repeat tender?
Watch cancellation notices, result notices on TED and national portals, and authorities' procurement plans. In Poland, the notice under Article 262 Pzp goes only to companies that took part in the previous procedure, so after a tender with no bids you need to follow the market yourself or use a monitoring tool.
How is a tender with no bids different from a single-bid tender?
In a single-bid tender the authority usually awards the contract to the only bidder if the bid is compliant and within budget. In a tender with no bids there is nobody to choose, so the procedure is cancelled. We collected data on both, including the sectors with the least competition, in our study of single-bid tenders in Poland (in Polish).
Do the conditions have to stay the same in a repeat tender?
No. The authority can change the budget, deadline, selection criteria or the split into lots. A substantial change, however, rules out a negotiated procedure without prior publication on this basis, so the authority then publishes a new contract notice.
Sources
- European Commission, Single Market Scoreboard: access to public procurement
- Directive 2014/24/EU on public procurement, Articles 32 and 40
- § 14 VgV, German Procurement Regulation
- Polish Public Procurement Law of 11 September 2019 (in Polish), in particular Articles 23, 84, 209, 222, 255, 262, 276 and 301
- Annual report of the President of the Polish Public Procurement Office for 2024 (in Polish)
- UZP annual report for 2025: analytical data (in Polish)
- Government reply to parliamentary question no. 16348 on the number of bids in public procurement (in Polish)
Want to see how Minerva spots repeat procedures in your sector and reads their documents? Book a call and we will show you on your own tenders.
Book a call in 30 seconds
You will receive:
Related articles
Trusted by 600+ organisations, from growing businesses to large enterprises.



